11/21/2023 0 Comments Conference call headset![]() To exit UniBase mode, press the mode button of the device you first used to start the conference call with.You can now conference a softphone call with the existing phone call.After about 4 seconds, the LED lights for both phone and computer mode will light up.Press and hold the PC button on the base.To activate UniBase mode, start with the base in phone mode with a call on the line.Your headset is equipped with UniBase technology that allows you to conference calls your office phone and softphone calls together. You may also need to click your softphone’s disconnect button to end the call.The base’s Online Indicator will turn off After finishing your call, press the ON/OFF button to disconnect.Press the headset’s ON/OFF button and the base’s Online Indicator will light up.Ensure that the PC button on the top of the headset base is selected.If you do not have an EHS cable or a handset lifter, you will need to manually disconnect the line on your phoneģ.3 Making an outgoing call in USB/PC mode To end the call, place the headset on the base or press the ON/OFF button.The base’s Online Indicator LED will light up If there is an incoming call and the headset base is connected to a handset lifter or electronic hookswitch device, the TEL light and headset light will flash, and a ring tone will be heard on the headset.Otherwise, just hang up the phone manuallyģ.2 Receiving an incoming call in telephone mode After finishing the call, press the headset ON/OFF button to end the call if you have a handset lifter or EHS cable.Otherwise, you will need to lift the handset of your telephone or activate the headset button on your telephone If a handset lifter or electronic hookswitch device is connected to the headset base, the line will be engaged automatically.The base’s 3rd indicator light will light up Ensure that the TEL button on top of the headset base is selected.Operation 3.1 Making an outgoing call in telephone mode To replace the ear pad, match the notches at the top, then click the bottom in place 3. To remove the ear pad of your LH270 or LH275 headset, put your thumb underneath the pad and pull up from the bottom. ![]() You may also need to select ‘disable’ on all other devices*
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |